Materials
Techniques
In case the last two techniques are too fiddly, you can alternatively cut the yarn of the main color after each petal and weave in the ends.
Size
One piece - as knitted by me - is about 29 cm wide and 15 cm high.
Construction
Petals constructed of short rows and contour lines in a contrast color. It consist of five big petals and four small ones. The first two big petals are shaped in a way that they have a small "cut out" at the left side. The middle petal is symmetrical, and the last two big petals are shape mirror-inverted to the first two. Between two big petals there is a small petal. This is shown below.
After each petal - when knitting the contour lines, you bind off 8 stitches, and then you cast them on again. After doing this, you should carry the main color yarn first back to the beginning of the row.
The picture below shows how this looks on the WS of the piece. Alternatively you can cut the yarn of the main color after each petal and weave in the ends.
It may be helpful to place a stitch marker after the 9th stitch. This means when binding off, you don't have to count but the 8 stitches to BO, but only have to BO up to the stitch before the marker.
I knitted the first washcloth without a stitch marker and sometimes left track of how many stitches I had already bound off. So I used a stitch marker for the second washcloth which worked well with regards to counting. But while knitting the petals the stitch marker got in the way, so I took it out again.
Instructions
CO32 in CC
Setup Row: k all
Right Petal
When starting to knit a petal, you slip the first two stitches - they are knitted only in CC to achieve a contour.
In MC
Ridge 1: sl2, k28, w+t, k26, w+t
Ridge 2: k24, w+t, k22, w+t
Ridge 3: k20, w+t, k18, w+t
Ridge 4: k16, w+t, k14, w+t
Ridge 5: k12, w+t, k10, w+t
Ridge 6: k8, w+t, k9, w+t
Ridge 7: k6, w+t, k8, w+t
Ridge 8: k6, w+t, k8, w+t
Ridge 9: k6, w+t, k8, w+t
Ridge 10: k22, w+t, k25, sl2
Long Contour
In CC
Row 1: sl1, k to end (carrying MC for the first 8 sts)
Row 2: sl1, k to 1 bef end, sl1
Row 3: BO8, w+t
Row 4: k1, CO8 with knitted cast on
Row 5: sl1, k8, k1tbl, k1, w+t
Row 6: k to end
Small Petal
In MC
Ridge 1: sl2, k14 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k12, w+t
Ridge 2: k10, w+t, k8, w+t
Ridge 3: k6, w+t, k4, w+t
Ridge 4: k3, w+t, k4, w+t
Ridge 5: k6, w+t, k8, w+t
Ridge 6: k10, w+t, k13, sl2
Short Contour
In CC
Row 1: sl1, k16, w+t (carrying MC for the first 8 sts)
Row 2: k to last st, sl1
Row 3: BO8, w+t
Row 4: k1, CO8 with knitted cast on
Row 5: sl1, k8, k1tbl, k1, w+t
Row 6: k to end
Knit
- a right petal (while carrying MC from the 8th stitch back to the 2nd stitch in Ridge 1)
- a long contour
- a small petal
- and a short contour
Middle Petal
In MC
Ridge 1: sl2, k28 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k26, w+t
Ridge 2: k24, w+t, k22, w+t
Ridge 3: k20, w+t, k18, w+t
Ridge 4: k16, w+t, k14, w+t
Ridge 5: k12, w+t, k10, w+t
Ridge 6: k9, w+t, k10, w+t
Ridge 7: k12, w+t, k14, w+t
Ridge 8: k16, w+t, k18, w+t
Ridge 9: k20, w+t, k22, w+t
Ridge 10: k24, w+t, k27, sl2
Knit
- a long contour
- a small petal
- a short contour
Left Petal
In MC
Ridge 1: sl2, k25 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k23, w+t
Ridge 2: k8, w+t, k6, w+t
Ridge 3: k8, w+t, k6, w+t
Ridge 4: k8, w+t, k6, w+t
Ridge 5: k9, w+t, k7, w+t
Ridge 6: k10, w+t, k11, w+t
Ridge 7: k13, w+t, k15, w+t
Ridge 8: k17, w+t, k19, w+t
Ridge 9: k21, w+t, k23, w+t
Ridge 10: k25, w+t, k28, sl2
Knit
- a long contour
- a small petal
- a short contour
- a left petal
Last Ridge
in CC
Row 1: sl1, k all
Row 2: BO all
Cut yarns, weave in ends.
I used the tail to sew the little hole between the first and last petal closed.
- about 25 to 35 grams of DK weight cotton yarn in two colors - called CC (contour color) and MC (main color)
- 3.5mm knitting needles
- (a stitch marker)
- a tapestry needle to weave in ends
Techniques
- Short rows with wrap and turn (w+t) - Since this washcloth is knit in garter stitch, you don't have to pick up your wraps - except in two rows, i.e. the rows where the wrapping color is different from the color of the wrapped stitch. These rows are indicated in the pattern. Here's a YouTube video that shows how to pick up your wraps (also by Very Pink Knits).
- Knitted Cast-On: See this Youtube-video by Very Pink Knits.
A tutorial for the knitted cast-on that uses this (Water Lily) pattern has been written by Christina Garza-Brown and can be found here at knitfarious.com - Weaving in yarn while knitting - carrying it towards the end of the row: This technique (and the next) are used to avoid a long float that runs parallel to your knitting - and to avoid cutting your yarn. When starting with the contour color yarn (lilac in the photos) before knitting a stitch you put the main coloryarn (white in the photos) over the contour color yarn (see illustration 1 below), then you knit the stitch. Before knitting the next stitch you twist the yarns again (see illustration 2). If you repeat these steps you can carry the yarn over a chosen number of stitches- so that it looks neat on WS (see illustration 3 below).
A similar technique (to weave in ends) is shown in this YouTube video by So, I make stuff.
- Weaving in yarn while knitting - towards the beginning of a row: This technique is similar to the one explained before and it serves the same purpose. You draw a long loop of the "new" yarn to the point where you want to knit it (picture 1). This gives you a really long float. Knit the first stitch. Before knitting the second stitch, catch the float by put the left hand needle under the float (picture 2) and then knit the stitch with your working yarn as usual. If you catch the float every second stitch, the WS will look as shown in picture 3. (This is a bit like catching floats in stranded knitting as shown in this YouTube video by Knit Purl Hunter.)
In case the last two techniques are too fiddly, you can alternatively cut the yarn of the main color after each petal and weave in the ends.
Size
One piece - as knitted by me - is about 29 cm wide and 15 cm high.
Construction
Petals constructed of short rows and contour lines in a contrast color. It consist of five big petals and four small ones. The first two big petals are shaped in a way that they have a small "cut out" at the left side. The middle petal is symmetrical, and the last two big petals are shape mirror-inverted to the first two. Between two big petals there is a small petal. This is shown below.
After each petal - when knitting the contour lines, you bind off 8 stitches, and then you cast them on again. After doing this, you should carry the main color yarn first back to the beginning of the row.
The picture below shows how this looks on the WS of the piece. Alternatively you can cut the yarn of the main color after each petal and weave in the ends.
It may be helpful to place a stitch marker after the 9th stitch. This means when binding off, you don't have to count but the 8 stitches to BO, but only have to BO up to the stitch before the marker.
I knitted the first washcloth without a stitch marker and sometimes left track of how many stitches I had already bound off. So I used a stitch marker for the second washcloth which worked well with regards to counting. But while knitting the petals the stitch marker got in the way, so I took it out again.
Instructions
CO32 in CC
Setup Row: k all
Right Petal
When starting to knit a petal, you slip the first two stitches - they are knitted only in CC to achieve a contour.
In MC
Ridge 1: sl2, k28, w+t, k26, w+t
Ridge 2: k24, w+t, k22, w+t
Ridge 3: k20, w+t, k18, w+t
Ridge 4: k16, w+t, k14, w+t
Ridge 5: k12, w+t, k10, w+t
Ridge 6: k8, w+t, k9, w+t
Ridge 7: k6, w+t, k8, w+t
Ridge 8: k6, w+t, k8, w+t
Ridge 9: k6, w+t, k8, w+t
Ridge 10: k22, w+t, k25, sl2
Long Contour
In CC
Row 1: sl1, k to end (carrying MC for the first 8 sts)
Row 2: sl1, k to 1 bef end, sl1
Row 3: BO8, w+t
Row 4: k1, CO8 with knitted cast on
Row 5: sl1, k8, k1tbl, k1, w+t
Row 6: k to end
Small Petal
In MC
Ridge 1: sl2, k14 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k12, w+t
Ridge 2: k10, w+t, k8, w+t
Ridge 3: k6, w+t, k4, w+t
Ridge 4: k3, w+t, k4, w+t
Ridge 5: k6, w+t, k8, w+t
Ridge 6: k10, w+t, k13, sl2
Short Contour
In CC
Row 1: sl1, k16, w+t (carrying MC for the first 8 sts)
Row 2: k to last st, sl1
Row 3: BO8, w+t
Row 4: k1, CO8 with knitted cast on
Row 5: sl1, k8, k1tbl, k1, w+t
Row 6: k to end
Knit
- a right petal (while carrying MC from the 8th stitch back to the 2nd stitch in Ridge 1)
- a long contour
- a small petal
- and a short contour
Middle Petal
In MC
Ridge 1: sl2, k28 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k26, w+t
Ridge 2: k24, w+t, k22, w+t
Ridge 3: k20, w+t, k18, w+t
Ridge 4: k16, w+t, k14, w+t
Ridge 5: k12, w+t, k10, w+t
Ridge 6: k9, w+t, k10, w+t
Ridge 7: k12, w+t, k14, w+t
Ridge 8: k16, w+t, k18, w+t
Ridge 9: k20, w+t, k22, w+t
Ridge 10: k24, w+t, k27, sl2
Knit
- a long contour
- a small petal
- a short contour
Left Petal
In MC
Ridge 1: sl2, k25 (while carrying MC from the 8th stitch back to the 2nd stitch), w+t, k23, w+t
Ridge 2: k8, w+t, k6, w+t
Ridge 3: k8, w+t, k6, w+t
Ridge 4: k8, w+t, k6, w+t
Ridge 5: k9, w+t, k7, w+t
Ridge 6: k10, w+t, k11, w+t
Ridge 7: k13, w+t, k15, w+t
Ridge 8: k17, w+t, k19, w+t
Ridge 9: k21, w+t, k23, w+t
Ridge 10: k25, w+t, k28, sl2
Knit
- a long contour
- a small petal
- a short contour
- a left petal
Last Ridge
in CC
Row 1: sl1, k all
Row 2: BO all
Cut yarns, weave in ends.
I used the tail to sew the little hole between the first and last petal closed.